|
|
Post by jonathandaroca on Aug 2, 2018 19:09:19 GMT -5
Is there a way to auto address or patch fixtures in LW? I read something that looked like typing in "101 thru 150" in the address fields would work, but it just assigns all selected fixtures to address 101.
Is there a specific syntax to type in?
Thanks.
|
|
|
|
Post by johnmcsoft on Aug 3, 2018 11:17:02 GMT -5
Set a DMX Qty for each instrument type (in Maintenance/Instrument Type), then select the address cells and type 101+ (note the "+"). That will assign addresses starting with 101 and skip the appropriate number of addresses for each light. More in the Lightwright Reference Manual, search for "Plus Editing", though you can also use a minus sign. The manuals are in Lightwright's Help menu.
|
|
|
|
Post by jonathandaroca on Aug 6, 2018 16:58:15 GMT -5
Thank you! I'll read through the section and see what else it can do .
|
|
|
|
Post by jonathandaroca on Aug 6, 2018 18:01:18 GMT -5
Aww man. As soon as I restarted the program, the tip at startup was how to use plus and minus editing. If only I had waited...
|
|
