|
Post by chs on Mar 8, 2018 12:49:54 GMT -5
looking to create a single label per breaker that shows ALL channels assigned to that breaker. Haven't had much luck creating it on one label. Is there a 'grouping' option? Any ideas to avoid multiple labels for the same breaker?
-- Drew
|
|
|
Post by litedoctor on Mar 10, 2018 13:28:24 GMT -5
Here's what I do. Let's say you've got three Auras all on Circuit 1 of a breakout. (Channels 101-103)
When laying out the circuits, put (101) in Circuit 1, (102) in Circuit 1.2, (103) in Circuit 1.3 LW is smart enough that it will put them all on the same breaker (or dimmer).
Create a user column called Shared Channels. For (101), enter "(102), (103)" in the Shared Channels column (without quotes). Leave that column blank for (102) and (103). (If you have a larger range of fixtures you could also type something like (202-210). Whatever makes sense to you.)
Create a Limit called Breakers. Set it to match All when the Circuit Number does not contain "." (again, without the quotes) This will hide Circuits 1.2 and 1.3 from your Worksheet.
On your breaker label, include a field for Shared Channels. I put mine right next to the Channel number in a smaller font.
Use the Breakers limit when you print your Breaker labels and you'll get one label per breaker, and breakers with multiple fixtures will have all the channels on that label.
|
|