|
Post by mdharpur on Aug 15, 2017 6:39:19 GMT -5
Hi All. I am currently having trouble printing Focus Charts on LW 6.0.12.151. The file has been synced with Vectorworks 2017 and the units are showing on plot but when I go to print the file just prints a blank page with no layout or anything. I have tried to print to pdf again with no luck. Other positions are printing no problem but I have 2 positions that are not.
Also I have added a couple of lanterns to another position and these new lanterns are also not printing on the plots.
any advice and/or help greatly appreciated
thanks M
|
|
|
Post by johnmcsoft on Aug 15, 2017 17:20:58 GMT -5
First, make sure all of the instrument types that should be on the focus charts have their "Has Focus Chart" status set correctly in Maintenance/Instrument Type. The "Has Focus Chart" column is the one with the F inside a red circle. Click the column to toggle it on and off (on = has the F in a red circle). If the instrument type focus chart settings are correct, then you should file a bug report at www.mckernon.com. Include the show file, with the layout file saved inside it, and be sure to indicate which positions are not printing. Also, LIghtwright 6.0.13 will be released tomorrow (August 16th), it includes some focus chart bug fixes.
|
|